How do I install CAT6 to be used in home for Network and Phone? - network phone systems
I understand that CAT6 has become the new standard for connecting your home phone and Internet system. I would like to install a phone line W / an Ethernet jack next to him in 4 different places.
I did some research, but I have some questions.
4 son in the house of the telephone company. Can these 4 son of the phone company and run in 1 - RJ11 connector? I will then jack and plug a DSL filter on and use some type of separator to this one line, which was divided into 5 lines to take.
4 lines going into each of the 4 seats in the last line phone would be my DSL modem.
Exit the DSL modem, and run on a router / hub and then install CAT6 cables to each of these 4 places.
Do I need DSL filters on the location of each phone or is not the DSL filter before the split around this?
I Run the project and run the 4 cables coming into the house wiring in a block? CAT6 to run and install this block 2 PhoneNE outlets in each community (4 cables to each RJ11)?
Is there a network diagram that you will all this show?
Tuesday, January 19, 2010
Network Phone Systems How Do I Install CAT6 To Be Used In Home For Network And Phone?
Subscribe to:
Post Comments (Atom)
3 comments:
You really only need the CAT 6, when an internal network at home, that a speed of 1 Gbit / s is required. This means that you do something that small and medium-sized enterprises that have access to an intranet server or on. Otherwise its kinda lose money.
Whether you are CAT 5e or 6, so you want to use only computers. Connectivity at home for the DSL modem and DSL filter, you can use it. Then you go to a router or switch. Since the router / switch, then run CAT 5e or 6 for the places you want to show connectivity.
You must run a separate line (below) for mobile phones!
Yes, what is before the man, "he said.
Just a quick note to add a later date, the only difference between CAT5, mail, etc. 6 the amount of interference is permissible, according to the age of the lines ... Couples crossed. You can easily convert gigabytes CAT5 cable ends cut off and give the case pairs (pairs 3 a.m. to 4 p.m.? Man) of his time and then placed shots.
But I respectfully disagree that it separate lines for phone, especially for home use only run.
Yes, what is before the man, "he said.
Just a quick note to add a later date, the only difference between CAT5, mail, etc. 6 the amount of interference is permissible, according to the age of the lines ... Couples crossed. You can easily convert gigabytes CAT5 cable ends cut off and give the case pairs (pairs 3 a.m. to 4 p.m.? Man) of his time and then placed shots.
But I respectfully disagree that it separate lines for phone, especially for home use only run.
Post a Comment